| Load Pressure |
7012 ACE/P4AL |
| Nominal Resistance |
95x60x18 |
| Maximum Axial Force At Standstill |
95 |
| Rate Of Pressure Change |
60 |
| Control Fluid Drain |
18 |
| Moment of inertia rotary group |
60 mm |
| Drive Speed |
95 mm |
| Case volume |
18 mm |
| Control Pressure Measurement |
72.74 mm |
| Maximum angular acceleration |
70.6 mm |
| Drive Power |
82.22 mm |
| Maximum Volume Flow |
2.4 mm |
| Rotary stiffness |
9 mm |
| Maximum Permissible Speed (limit Speed) |
3.4 mm |
| Determining Operating Characteristics |
3.4 mm |
| Flow |
1.1 mm |
| Power |
0.6 mm |
| Maximum rotational speed |
27.3 mm |
| Sequence Valve |
66 mm |
| Torque |
66 mm |
| Voltage |
89 mm |
| Pilot Pressure |
90.8 mm |
| Pressurefree Operation |
1 mm |
| Weight (approx.) |
0.6 mm |
| Maximum Permissible Pilot Pressure |
74.6 mm |
| Displacement, geometric, per revolution |
16.3 kN |
| Maximum Torque |
12.2 kN |
| Fatigue load limit - Pu |
0.52 kN |
| Limiting speed for grease lubrication |
18000 r/min |
| Limiting speed for oil lubrication |
28000 mm/min |
| Ball - Dw |
7.938 mm |
| Ball - z |
25 |
| Gref |
5.3 cm3 |
| Calculation factor - e |
0.68 |
| Calculation factor - Y2 |
1.41 |
| Calculation factor - Y0 |
0.76 |
| Calculation factor - X2 |
0.67 |
| Calculation factor - Y1 |
0.92 |
| Preload class A - GA |
150 N |
| Preload class B - GB |
440 N |
| Preload class C - GC |
870 N |
| Calculation factor - f |
1.08 |
| Calculation factor - f1 |
0.99 |
| Calculation factor - f2A |
1 |
| Calculation factor - f2B |
1.03 |
| Calculation factor - f2C |
1.06 |
| Calculation factor - fHC |
1 |
| Preload class A |
122 N/micron |
| Preload class B |
180 N/micron |
| Preload class C |
235 N/micron |
| d1 |
72.74 mm |
| d2 |
70.6 mm |
| D1 |
82.22 mm |
| C1 |
9 mm |
| C2 |
3.4 mm |
| C3 |
3.4 mm |
| r1,2 min. |
1.1 mm |
| r3,4 min. |
0.6 mm |
| da min. |
66 mm |
| db min. |
66 mm |
| Da max. |
89 mm |
| Db max. |
90.8 mm |
| ra max. |
1 mm |
| rb max. |
0.6 mm |
| dn |
74.6 mm |
| Basic dynamic load rating C |
16.3 kN |
| Basic static load rating C0 |
12.2 kN |
| Fatigue load limit Pu |
0.52 kN |
| Attainable speed for grease lubrication |
18000 r/min |
| Attainable speed for oil-air lubrication |
28000 r/min |
| Ball diameter Dw |
7.938 mm |
| Number of balls z |
25 |
| Reference grease quantity Gref |
5.3 cm³ |
| Preload class A GA |
150 N |
| Static axial stiffness, preload class A |
122 N/µm |
| Preload class B GB |
440 N |
| Static axial stiffness, preload class B |
180 N/µm |
| Preload class C GC |
870 N |
| Static axial stiffness, preload class C |
235 N/µm |
| Calculation factor f |
1.08 |
| Calculation factor f1 |
0.99 |
| Calculation factor f2A |
1 |
| Calculation factor f2B |
1.03 |
| Calculation factor f2C |
1.06 |
| Calculation factor fHC |
1 |
| Calculation factor e |
0.68 |
| Calculation factor (single, tandem) Y2 |
0.87 |
| Calculation factor (single, tandem) Y0 |
0.38 |
| Calculation factor (single, tandem) X2 |
0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 |
0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 |
1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 |
0.76 |
| Calculation factor (back-to-back, face-to-face) X2 |
0.67 |
| Mass bearing |
0.42 kg |