| Load Pressure | 7012 ACE/P4AL |
| Nominal Resistance | 95x60x18 |
| Maximum Axial Force At Standstill | 95 |
| Rate Of Pressure Change | 60 |
| Control Fluid Drain | 18 |
| Moment of inertia rotary group | 60 mm |
| Drive Speed | 95 mm |
| Case volume | 18 mm |
| Control Pressure Measurement | 72.74 mm |
| Maximum angular acceleration | 70.6 mm |
| Drive Power | 82.22 mm |
| Maximum Volume Flow | 2.4 mm |
| Rotary stiffness | 9 mm |
| Maximum Permissible Speed (limit Speed) | 3.4 mm |
| Determining Operating Characteristics | 3.4 mm |
| Flow | 1.1 mm |
| Power | 0.6 mm |
| Maximum rotational speed | 27.3 mm |
| Sequence Valve | 66 mm |
| Torque | 66 mm |
| Voltage | 89 mm |
| Pilot Pressure | 90.8 mm |
| Pressurefree Operation | 1 mm |
| Weight (approx.) | 0.6 mm |
| Maximum Permissible Pilot Pressure | 74.6 mm |
| Displacement, geometric, per revolution | 16.3 kN |
| Maximum Torque | 12.2 kN |
| Fatigue load limit - Pu | 0.52 kN |
| Limiting speed for grease lubrication | 18000 r/min |
| Limiting speed for oil lubrication | 28000 mm/min |
| Ball - Dw | 7.938 mm |
| Ball - z | 25 |
| Gref | 5.3 cm3 |
| Calculation factor - e | 0.68 |
| Calculation factor - Y2 | 1.41 |
| Calculation factor - Y0 | 0.76 |
| Calculation factor - X2 | 0.67 |
| Calculation factor - Y1 | 0.92 |
| Preload class A - GA | 150 N |
| Preload class B - GB | 440 N |
| Preload class C - GC | 870 N |
| Calculation factor - f | 1.08 |
| Calculation factor - f1 | 0.99 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.03 |
| Calculation factor - f2C | 1.06 |
| Calculation factor - fHC | 1 |
| Preload class A | 122 N/micron |
| Preload class B | 180 N/micron |
| Preload class C | 235 N/micron |
| d1 | 72.74 mm |
| d2 | 70.6 mm |
| D1 | 82.22 mm |
| C1 | 9 mm |
| C2 | 3.4 mm |
| C3 | 3.4 mm |
| r1,2 min. | 1.1 mm |
| r3,4 min. | 0.6 mm |
| da min. | 66 mm |
| db min. | 66 mm |
| Da max. | 89 mm |
| Db max. | 90.8 mm |
| ra max. | 1 mm |
| rb max. | 0.6 mm |
| dn | 74.6 mm |
| Basic dynamic load rating C | 16.3 kN |
| Basic static load rating C0 | 12.2 kN |
| Fatigue load limit Pu | 0.52 kN |
| Attainable speed for grease lubrication | 18000 r/min |
| Attainable speed for oil-air lubrication | 28000 r/min |
| Ball diameter Dw | 7.938 mm |
| Number of balls z | 25 |
| Reference grease quantity Gref | 5.3 cm³ |
| Preload class A GA | 150 N |
| Static axial stiffness, preload class A | 122 N/µm |
| Preload class B GB | 440 N |
| Static axial stiffness, preload class B | 180 N/µm |
| Preload class C GC | 870 N |
| Static axial stiffness, preload class C | 235 N/µm |
| Calculation factor f | 1.08 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.03 |
| Calculation factor f2C | 1.06 |
| Calculation factor fHC | 1 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 0.42 kg |
